|
 |
| Pro-Tech Parts and Accessories for Tractor Trailers / Heavy Duty Trucks |
CAB RACKS
 |
STANDARD CAB RACK
Sleek heptagon perimeter tube enhances the original Pro-Tech shape and time proven bright aluminum diamond plate panel.
Specifications:
10-1003: 65' high x 70' wide
10-1093: 68' high x 86' wide
10-1033: 68' high x 70' wide
10-1103: 68' high x 90' wide
10-1083: 68' high x 80' wide |
SPACE SAVER CAB RACK
Space-Saver Cab Rack
Exclusive angle mount cabguard, bolts directly to truck frame. Provides up to 6' more trailer swing clearance. Great for many of today's trucks with shorter wheelbases!
Specifications:
10-1074: 65" high x 70" wide 10-1094: 68" high x 86" wide
|
|
 |
Cab Rack with 10-5000 window.
Window may be ordered with any Pro-Tech Cab Rack or Drom.
10-1003 Cab Rack shown with 10-5000 Window
|
10-1003-592 Cab Rack
Two each 10-5903 locking chain hangers, chain trays and 10-2401 tool box. Other options may be added to fit your needs.
|
|
 |
Cab Rack w/ Center Enclosure
10-1110 68" high x 86" wide Cab Rack. With center enclosure. Includes top shelf and chain hanger installed inside of compartment
|
ENCLOSED CAB RACK
14" deep compartments provide 37 cubic feet of storage space. Stainless steel, keyed T-latches ensure security. Compartments are sealed with neoprene bulb type weather seal to keep equipment clean and dry. Enclosed units available with any Pro-Tech Cab Rack or Drom.
Specifications:
10-1150: Enclosed 68" high x 86" wide 10-1151 Enclosed 68"high x 80"wide
|
|
CAB RACK OPTIONS
Full Chain Tray
10-3541 Installed to hold hanging chains. |
Recessed Chain Tray
Designed to be used with 10-5903 locking chain hanger.
10-3315 Tray fills space between uprights to cab side and below cabguard. Holds hanging chains without interfering with trailer swing clearance
|
8" X 8 " Chain Trays
10-3510: 8" high x 8" deep x 84" long
10-3610: 8" high x 8" deep x 64" long
10-3710: 8" high x 8" deep x 25" long
10-3810: 8" high x 8" deep x 18" long
Part numbers above are for chain trays installed on a new Pro-Tech Cab Rack.
All sizes are available to ship loose for retrofit applications |
12" X 12" Chain Trays
10-3500: 12" high x 12" deep x 84" long
10-3600: 12" high x 12" deep x 64" long
10-3700: 12" high x 12" deep x 25" long
10-3800: 12" high x 12" deep x 18" long
Part numbers above are for chain trays installed on a new Pro-Tech Cab Rack.
All sizes are available to ship loose for retrofit applications |
Cab Rack Light Options
10-4450
Beacon Light Bracket (beacon light not included)
10-4425
Round Sealed Beam Light , S/T/T (also avalible)
10-4420
Oval Sealed Beam Light , S/T/T (shown |
|
DROMS
Standard Drom Configuration
10-1250: Drom-Cabguard 68' high x 96' wide x 2'6' long
10-1400: Drom-Cabguard 68' high x 96' wide x 4' long
(Pictured above)
10-1600: Drom-Cabguard 68' high x 96' wide x 6' long
10-1800: Drom-Cabguard 68' high x 96' wide x 8' long
NOTE: Drom length is measured from forward (cab side) of cabguard uprights, to extreme rear (fifth wheel side) of deck. Custom sizes available |
Conventional Drom with Window
10-1255: with 10-5005 window option.
The cabguard panel is 68" high. The panel and deck are 70" wide, and they match the width of conventional cabs without sleepers. The deck measures 2'6" overall length. It gives a streamlined appearance and reduces wind resistance.
|
Drom Enclosure
14" deep enclosed drom unit provides over 50 cubic feet of storage space. Compartments are sealed with neoprene, bulb type weather seal to keep equipment clean and dry. Stainless steel, keyed latches provide security. Optional chain hangers and shelves may be installed. Enclosures may be ordered with any Pro-Tech drom assembly. Custom units are also available!
|
TOOL BOXES
ALUMINUM TOOL BOXES
Standard Box Sizes
18"H x 18"D x Length
18"'H x 24"D x Length
24"H x 24"D x Length
Standard Lengths: 24", 30", 36"', 48", 60", 72"
Available in Drop-Down, Double-Swing or Side-Swing Door configurations.
Your choice of smooth or diamond plate aluminum body and/or doors. (Additional charges may apply.) |
Sloped Lid Boxes for Cab Rack or Frame Mounting
20-2401 19" High x 25" Deep x 24" Long
Top open, smooth body, diamond plate lid.
Designed to mount between cabguard feet.
20-2410 20"High x 20'' Deep x 30" Long
Top open, smooth body, diamond plate lid.
Designed for frame mounting. |
Cab Entry Box
15"H x 30"D x 24"L or 31"L
Blub-sealed, watertight box with stainless t-lock. Replaceable front step assembly.
|
Battery Box
15"H x 22"D x 30"L
with upper and lower steps. |
Inframe Tool Box
22"L. Includes mounting clips and bolts to clamp box to truck frame. 8" to 10" deep.
|
Aluminum Step Boxes
From left to right:
20-2450: 28" D x 25" H x 12" L
20-2460: 28" D x 25" H x 18" L
20-2470: 28" D x 25" H x 24" L
Not Shown:
20-2480: (30") 20-2490: (36")
Pro-Tech aluminum step boxes provide storage space in conjunction with a frame step. Step boxes have smooth aluminum bodies and aluminum diamond plate doors. Bulb type seals and stainless steel keyed T-latches are standard. Step boxes come as complete units with top platform and steps installed. 12", 18" and 24" boxes come with internal mounting brackets. External are required on 30" and larger boxes. Custom sizes are also available! Boxes may aslo be ordered without steps. No additional charge for Diamond Plate doors.
|
STEEL TOOL BOXES
Standard Box Sizes
| 18"H x 18"D x Length |
| 18"H x 24"D x Length |
| 24"H x 24"D x Length |
| Standard Lengths: 24", 30", 36", 48", 60", 72" |
| Steel toolboxes are maunfactured with a black powdercoat primer finish. Available in Drop-Down, Double Swing or Side Swing Door configurations. |
|
Hasp Boxes
| 22-2128B |
| 18" Deep x 18" High x 36" Long (Top Box) |
| Single drop down style door, hasp type latch, stainless steel hinge. Available in all popular sizes. |
| 22-2232B |
| 24" Deep x 24" High x 48"Long (Bottom Box) |
| Single drop down style door, hasp type latch, stainless steel hinge. Available in all popular sizes. |
|
Slope-Top Steel Boxes
| 22-2431 |
| 18" Deep x 18" High x 24"Long (Top Box). |
| Top open lid, Hasp type Latch, tapered top. |
| 22-2432 |
| 18" Deep x 18" High x 24"Long (Bottom Box). |
| Top open Lid, Hasp type Latch, flat top. |
|
Toolbox Mounting Brackets
Galvanized, Steel construction. Designed for frame mounting of Boxes.
20-9710 (at left) For 18" Deep Boxes
20-9700 (at right) For 24" Deep Boxes.
|
FENDERS
Bright Aluminum Diamond Plate
Our Specialty! Bright shiny diamond plate fenders in .105" aluminum gives your rig a custom appearance while providing added durability and scratch resistance.
Pictured:
30-7320 Half Tandem
30-7340 Full Radius Single Axle
30-7360 Full Tandem, Double Radius
|
Smooth, Shiny Aluminum & Bright Stainless Steel
| Bright smooth Fenders without stiffening ribs. |
| 1/8" aluminum or 14ga. stainless steel for extra strength and show quality appearance. Available in all standard configurations. |
30-7342: |
| Full Radius Single Axle Aluminum Fender (Left) |
| 30-7322: |
| Half Tandem Single Radius Aluminum Fender (Right) |
|
Ribbed Aluminum Fender
.090" material with three stiffening ribs for strength. Lightweight Aluminum, never needs painting, and requires minimum maintenance. Available in all standard configurations. 14ga.mild steel Fenders stocked in three rib style, also.
30-7344: Full Radius Single Axle (Left)
30-7324: Half Tandem Single Radius (Right)
|
Outer Mounting Bracket
30-7391S: Outer mounting bracket, Stainless Steel. Universal end plate for frame mounting. Stainless bolts, rubber pads and backing plates included.
30-7391: Outer mounting bracket, black powder coat finish. Stainless steel bolts, rubber pads and backing plates included.
|
|
Under Mounting Bracket
30-7525L: Under mounting bracket, Black powder coat finish, left hand shown. Adjustable galvanized riser plate, stainless bolts, rubber pads and backing plates included. |
1/4 Fender for Air, Air Leaf and Low Air Leaf Suspensions
Stainless Steel Fender & Bracket Kits include two fenders, plus stainless mounting brackets.
30-7319-27F: 27" wide Stainless Steel Quarter Fenders with Brackets
30-7319-30F: 30" wide Stainless Steel Quarter Fenders with Brackets
|
1/4 Fenders for Kenworth & other "clean mount" applications
Stainless Steel Fender & Bracket Kits include two fenders, plus stainless mounting brackets.
30-7319-27K: 27" wide Stainless Steel Quarter Fenders with Brackets
30-7319-30K: 30" wide Stainless Steel Quarter Fenders with Brackets |
1/4 Fenders for Air Trac & Air Ride Suspensions
Stainless Steel Fender & Bracket Kits include two fenders, plus stainless mounting brackets.
30-7319-27P: 27" wide Stainless Steel Quarter Fenders with Brackets
30-7319-30P: 30" wide Stainless Steel Quarter Fenders with Brackets
|
FENDER SPECIFICATIONS
Full Tandem, Double Radius
| 30-7360: |
Aluminum diamond plate |
| 30-7362: |
.125" Aluminum smooth shiny |
| 30-7364: |
.090" Aluminum smooth w/ribs |
| 30-7367: |
14 gauge Bright Stainless Steel |
| 30-7368: |
14 gauge Mild Steel w/ribs |
| 30-7488: |
Mounting kit to mount 2 each |
Full Tandem Double Radius Fenders. |
Half Tandem, Single Radius
| 30-7320: |
Aluminum diamond plate |
| 30-7322: |
.125" Aluminum smooth shiny |
| 30-7324: |
.090" Aluminum smooth w/ribs |
| 30-7327: |
14 gauge Bright Stainless Steel |
| 30-7328: |
14 gauge Mild steel w/ribs |
| 30-7484: |
Mounting kit to mount 2 each |
Half Tandem Single Radius Fenders. |
Full Radius, Single Axle & Half Circle
| 30-7340 |
Aluminum diamond plate |
| 30-7342: |
.125" Aluminum smooth shiny |
| 30-7344: |
.090" Aluminum smooth w/ribs |
| 30-7347: |
14 gauge Bright Stainless Steel |
| 30-7348: |
14 gauge Mild Steel w/ ribs |
| 30-7350: |
Aluminum diamond plate |
| 30-7352: |
.125" Aluminum smooth shiny |
| 30-7354: |
.090" Aluminum smooth w/ ribs |
| 30-7357: |
14 gauge Bright Stainless Steel |
| 30-7358: |
14 gauge Mild Steel w/ ribs |
| 30-7482: |
Mounting kit to mount 2 each |
Full Radius, Single Axle or 2 each Full Radius, Half Circle Fenders. |
Full Tandem, Single Radius 
| 30-7330: |
Aluminum diamond plate |
| 30-7332: |
.125" Aluminum smooth shiny |
| 30-7334: |
.090" Aluminum smooth w/ribs |
| 30-7337: |
14 gauge Bright Stainless Steel |
| 30-7338: |
14 gauge Mild Steel w/ribs |
| 30-7486: |
Mounting kit to mount 2 each |
Half Tandem Single Radius Fenders |
Cross Sections
 Left: Typical cross section with ribs
Right: Typical cross section without ribs. |
FLATBEDS
 |
 |
Standard Aluminum Flatbed Pro-Tech's flexible design options allow you to build exactly the flatbed body you need. (Double tapered head board optional)
|
Flatbed with Side Slats Perfect for hauling small parts, pallets, equipment, etc. Removable side slats make this a multi-function choice for working trucks. |
RV Toter
Specially designed with fifth-wheel hitch (ball-type) for hauling RV's, Horse Trailers, etc. Lots of storage options, plus lightweight construction!
|
Contractor Body
Contractor Body shown includes lumber rack, drop-door underbody boxes, top-side box, mesh boxes, removable tail panel, rear light panel, underride bumper. Custom-built to your specs! |
Dump Body
Light-Weight aluminum dump bodies custom made to order. |
Flatbed w/ Under-Body Storage
Pro-Tech flatbed with convenient underbody storage units available in standard or custom sizes.
|
Aluminum Underbody Box 18x18x36
With single drop down door. Available in 18", 24", 30", 36", 48" or 60" lengths. |
Steel Underbody Box
18x18x30
With single drop down door, includes lanyards to hold door horizontal when open.
Available in 18", 24", 30", 36", 48" or 60" lengths.
|
Contractor Box Top-Open lid plus Front-Open doors for ultimate convenience and usability.
Extra large drop door openings let you store and retrieve large items easily.
Standard sizes available: 20\" high x 18\" deep in 4\' to 8\' lengths.
|
ACCESSORIES
Aluminum Frame Steps Provide easy frame access with 4-way grip steps. Universal mount for simple installation on truck frame 24" high.
35-5250: 12" wide
35-5260: 18" wide
35-5270: 24" wide |
Aluminum Diamond Plate Frame Deck Covers Diamond plate Deck Covers are stocked in lengths from 2 feet to 8 feet, with and without stiffeners.Deck Covers now include hidden-mount mounting kit at no additional charge!
| 35-5420: 2 ft. Long |
| 35-5430: 3 ft. Long |
| 35-5440: 4 ft. Long |
| 35-5450: 5 ft. Long |
| 35-5460: 6 ft. Long |
| 35-5470: 7 ft. Long |
| 35-5480 : 8 ft. Long |
|
Aluminum Grate Style Deck Cover
35-5400: Frame Deck Cover, aluminum grate style. Deck Covers now include mounting kit!
34" wide x 36" long, 4-way grip, self draining.
|
Tire Chain Hangers
35-5950 (Right): Removable cover. Allows easy access and security for tire chains. Requires less than 12' of frame space.
35-5951 (Left): Hinged cover. Same as 35-5950, except cover is attached with stainless steel hinge to prevent loss/damage to cover.
|
Cab Rack Mounting Kit Standard kit includes: zinc plated bolts, flat washers, lock nuts, rubber frame pads, rubber tie-down pads, plated tie-down plates. Recommended for installation of Cab Racks.
J-Hook style mounting kit and Drom mounting kit also available.
10-9401: Standard Cab Rack Mounting Kit
Cab Racks and Droms must be installed with Pro-Tech mounting kit and per instructions provided. Failure to do so will void warranty and seriously reduce load rating of cab rack.
|
Trailer Mounted Bulkhead
Pro-Tech manufactures aluminum bulkheads for 96" and 102" wide trailers. Both sizes are available with a 10" or 24" turnback. Standard designs have been tested and rated. |
|
