| 1988 TAYLOR |
 |
| TC200S |
|
| 1994 TAYLOR |
 |
| TE520S |
|
| 1995 AUTOLIFT |
 |
| D5-700 |
|
| 1995 KALMAR |
 |
| DCB236-1200 |
|
| 1996 TAYLOR |
 |
| THD160 |
|
| 1997 KALMAR |
 |
| RORO |
|
| 2000 TAYLOR |
 |
| THC800 |
|
| 2001 CAT |
 |
| DP150 |
|
|
| HEAVY DUTY FORKLIFTS |
| 2004 KALMAR DCD370-1200 |
Very nice 80,000lb. capacity at a 48 inch load center forklift that is serviced and ready to go to work
| Year: 2004 |
| Make: Kalmar |
| Model Number: DCD370-1200 |
| Powered By: Diesel |
| Chassis Type: |
Pneumatic tire |
| Basic capacity / lbs: |
80,000 lbs. |
| Engine: |
Volvo 6 cylinder turbo diesel engine |
| Transmission: |
Powershift |
| Differential: |
Planetary |
| Steering: |
Power |
| Service Brakes: |
Enclosed Wet Disc |
| Mast Type: |
3 Staged Reach stacker. upright with a Sideshifting - Forkpositioning Carriage and 40" of free lift |
| Mast Lowered Height : |
165.00 " |
| Mast Max Fork Height : |
232.00 " |
| Mast Freelift : |
40.00 " |
| Fork/ Lift Attachment |
4.3" x 12" x 94.5" pallet |
| Carriage : |
Standard Kalmar |
| Tires: |
Six 1800 x 25 - 36 ply @ 70% |
| Operator's Compartment: |
Enclosed two door right offset cab w/ heat. |
Hard to find big pneumatic with a triple stage upright. Very well maintained forklift. 3,017 Hours
|
| 2009 KALMAR |
 |
| DCD250-12 |
|
| 2008 TAYLOR |
 |
| TX4030 |
|
| 2007 ROYAL |
 |
| T300CS |
|
| 2007 KALMAR |
 |
| DCE120-12 |
|
| 2007 HYSTER |
 |
| H550F |
|
| 2006 HOIST |
 |
| P360-48 |
|
| 2005 HYSTER |
 |
| H620F |
|
| 2005 CATERPILLAR |
 |
| DP150 |
|
|
