Wheel Lift Systems...The problem solver for Preventative Maintenance and Transmission & Drive Line repair on a variety of hard to lift vehicles.

The wheel lift systems were designed to accommodate the aerodynamics and ferrings used on class 8 vehicles. The system quickly and easily cradles the tires giving the technician an optimum lift point every time, no more jacking and blocking.

• Lift from either the front or rear of the vehicle!
• Saves shop time...no more time wasted removing aerodynamics or ferrings from vehicle, the wheel lift system cradles the wheels during lift.
• Versatile...lifts one end of a wide array of vehicles including class 8 over-the-road vehicles, fire or refuse trucks, heavy recreational vehicles or motor coaches.
• 100% air operated...easily raises vehicle at only 145 psi
• Doubles as a support stand...secure the load by inserting the load retention pin in one of the six different locations, allowing complete open access underneath the vehicle.
• One control valve...operates both units simultaneously
• Spring-loaded casters... allows wheel lift base to securely rest on surface to prevent any movement after lift.
• No installation required...comes assembled, ready to use.
• No Electrical Connections required...
• Optional Small Wheel Adapters available to accommodate lifting 16" to 19-1/2" wheels.
• Portable! Use in any area of the shop.

Back to top

Heavy Duty Transmission Jacks

Designed with the professional technicians in mind, these heavy-duty truck transmission jacks are in a class of their own. These jacks include a truck component handling system (TCHS kit) that allows the jack to handle a wide variety of components including various models of transmissions, differentials, power dividers, auxiliary boxes and axle assemblies. This universal jack is guaranteed to increase your shop productivity and create a secure working environment for the shop technician.

Both models feature:

• Versatile...handles awkward components with ease, including transmissions, differentials, axle assemblies, power dividers and auxiliary boxes.
• Quick and easy setup...follow operation instructions to ensure ease of setup for handling components.
• Single person operation...no more time spent trying to find help removing heavy components.
• Hefty...1 metric ton (2,206-lb) capacity
• Rugged...designed and manufactured with Gray's high quality/low maintenance guarantee.
• Ratcheting brackets...secure the load fast.
• Precise...tilting head offers a wide range of side-to-side and for and aft tilt. Wrench controllable.
• Four - 4" steel swivel casters...allows easy maneuvering throughout the shop

Back to top

Hi-Rise Truck Component Jack



More than just the average transmission jack...Gray's model HTCJ-2000 enables the technician the flexibility of handling a wide array of components including power dividers, differentials, axle assemblies, auxiliary boxes, as well as, the many awkward transmissions on the market today.

Includes Truck Component Handling Adapters

Model HTCJ-2000 (Heavy Duty Transmission Jack)

• Low starting height of 30"... easily remove jack from underneath four post lifts with a component on the jack
• High lift height of 72"...works underneath mobile column lifts
• Two-stage operation...1st stage 100% air operation, 2nd stage air/hydraulic
• 1 metric ton capacity...built to handle the heaviest components
• Four - 8" steering swivel casters...provides ease when maneuvering throughout the shop
• 360° - head rotation...allows adjustment of the head plate when removing components
• TCHS kit...included enables removal and replacement of awkward components
• Tow handle...allows technician-controlled movement of jack throughout shop; easily stores away when not in use

Back to top

TRUCK SERVICE LIFT

Model TSL-50
25 ton (50,000-lb) capacity - Air/Hydraulics

• Low starting height of 8"...gives you the versatility needed for lifting low profile vehicles.
• Stout...25 tons of lifting power with as little as 90 psi.
• Compact...easily fits between dual tandem axles.
• Air-powered ram retract...no springs to wear out. Air pressure automatically resets the ram back to the minimum starting height.
• Adaptable...various starting heights achieved with 5-1/8" ram travel, 4-7/8" screw extension and 3" height adapter gives you a maximum lift height of 21".
• Corrosion Resistant Design...unique internal bladder system pressurizes the reservoir for speed and insures a non-corrosive environment in the hydraulic system.
• Three position handle...for portability and flexibility.
• Rapid-Rise to load...unique design allows ram to come in contact with the load at a faster rate.
• 3" height adapter...included allowing maximum lift height of 21" to be achieved.

Back to top

• 360° head rotation...allows precise alignment when replacing clutch
• Low starting height of 38 1/2"
• High lift height of 79"
• Convenient...handles heavy components that usually tie up two technicians.
• Accurate...provides side-to-side rotation and vertical tilt adjustments.
• Strong...welded steel frame construction for durability
• Includes...2" spline with 1" hub pilot bearing shaft
• Swivel casters...maneuver jack around shop with ease with four 4 " wheels
• Use in conjunction with four post drive-on lift or Gray's Wireless Portable Lift System
• Two stage design...first stage air operated for speed and second stage

• 360° head rotation...allows precise alignment when replacing clutch
• Low profile design...easily remove from under vehicle with clutch/component on jack
• Convenient...handles heavy components that usually tie up two technicians.
• Accurate...provides side-to-side rotation and vertical tilt adjustments.
• Strong...welded steel frame construction for durability
• Includes...2" spline with 1" hub pilot bearing shaft
• Swivel casters...maneuver jack around shop with ease with

Model TAJS-2000
20,000 lb Truck Air Jack Stand

The perfect solution for springs, seals and brakes.
Doubles as support stands!
Use in pairs for 20 tons of lifting power.

• 100% Air operated...provides long lift with minimal maintenance
• Adjustable...various starting heights combined with ram travel give you the maximum lift height desired
• Removable handle and two wheels...allow ease in spotting and portability

Back to top

Fluid Handlers

Why mess with the hassle of carrying 5-gallon buckets. Eliminate the spills and mess with a Fluid Transfer System. Simply drain the fluid from the vehicle into the reservoir and roll to used fluid container. No need to lift and pour, simply hook up the compressed air line and all the work is done.

• 3/4" flow control valve...allows operator control of fluid when re-using.
• Micron tubular screen filter...enables the fluid to be filtered and re-used.

Back to top

Both models feature:

• 15-gallon capacity...holds enough fluid from one class 8 vehicle.
• Clean, efficient fluid changing...no more mess handling the fluid
• Air pressurized system...no pump to wear out - uses shop air
• Factory set regulator with safety pop-off valve...prevents overloading of air
• 3 swivel casters...provides portability when maneuvering throughout the shop
• 10' drain hose...allows easy positioning when draining reservoir
• Non-splash pad...prevents mess when draining fluid from vehicle.
• 100% air operated...compressed air closes the diaphragm that forces fluid out 3/4" drain hose.
• Portable...easily maneuvers around shop with three wheels.
• Compact...requires little storage space, stand on end and store away

Let shop air do the work!

• No more pumping...Air/Hydraulic design allows jack to rise quickly (required air pressure 115 PSI)
• Two-position handle...makes for easy portability.
• Hold to Run™ release knob feature...allows precise operator control and provides a slower descent rate.
• Two-position lift pad...provides notched or pad contact for jack use on a variety of surfaces.
• Lift pads...follows the load and adjusts to load plane as jack is raised and lowered.

Two-speed pump...raises lift pad quickly to meet load and then automatically adjusts to low speed for easier lifting.

• Low starting height of 2-1/4"...increases range of application and ease in use.
• Spring-loaded handle...allows the jack to be maneuvered easily throughout the work area.
• Hold to Run™ release knob feature...allows precise operator control and provides a slower descent rate.
• Two-position lift pad...provides notched or pad contact for jack use on a variety of surfaces.
• Lift pads...follows the load and adjusts to load plane as jack is raised and lowered.

Let shop air do the work!

• No more pumping...Air/Hydraulic design allows jack to rise quickly (required air pressure 115 PSI)
• Two-position handle...makes for easy portability.
• Hold to Run™ release knob feature...allows precise operator control and provides a slower descent rate.
• Two-position lift pad...provides notched or pad contact for jack use on a variety of surfaces.
• Lift pads...follows the load and adjusts to load plane as jack is raised and lowered.

Back to top

The workhorse of industrial shops for over 25 years.

• Versatile...combines a high capacity with a low starting height of 2-1/4"
• Built strong...specially designed seals, chrome-plated parts and high-strength steel construction make Gray forklift jacks the choice of professionals for strength and endurance.
• Hold to Run™ release knob feature...allows precise operator control and provides a slower descent rate.
• Two-position lift pad...provides notched or pad contact for jack use on a variety of surfaces.
• Lift pads...follows the load and adjusts to load plane as jack is raised and lowered.

Increase productivity by using Hi-Rise Vehicle Suppport Stands to completely support a vehicle so you can move your WPLS-160 to the next job. Each 8T-H vehicle support stand has a 16,000 lb. Capacity and supports between 48 ¾" and 84". Heavy-duty urethane wheels provide easy positioning. Easily adjustable, the Gray 8T-H Hi-Rise Stand features include:

• Gas-spring assisted lift post
• 2 ¾" support pin increments
• 5 ½" lift pad screw adjustment range
  

$552.00

Designed for use on MCI Motor coach models C, D, DL3, E, and J.

Vehicle support stands 100,000 lb. capacity per pair. Combines a low starting height of 12" and a high lift height of 20".

Back to top

Vehicle support stands 40,000 lb. capacity per pair with an adjustment range of 20" to 32".

Vehicle support stands 30,870 lb, (14008 kg) capacity per pair with adjustment range of 12" to 20".

Vehicle support stands 30,870 lb. capacity per pair with a low starting height of 9-1/2" to 16".

Four Post Lifts

Great for transmission, tire, wheel, exhaust and general maintenance work.

• Surface mounted...fits nearly any bay with no excavating
• Electric/Hydraulic power
• Four-post design...allows complete open floor access
• Choice of capacities...to fit your specific needs
• 100% Air operated...internal air bag

Model QL-600
60,000 lb Four Post Drive-On Lift

Model QL-140
14,000 lb Four Post Drive-On Lift

Model DRIVE THRU for QL-600
Drive Thru Ramps for QL-600

$1,530.00
Allows you the flexibility of having a drive thru bay. Simply add these ramps to the end of your four post lift and never have to back off a lift again.

Model DRIVE THRU for QL-400& QL-500
Drive Thru Ramps for QL-500

Allows you the flexibility of having a drive thru bay. Simply add these ramps to the end of your four post lift and never have to back off a lift again.

Engineered and designed to stand up to the demands of a heavy-duty truck repair, fleet maintenance and bus maintenance shop. The perfect solution for tires, transmissions, brakes, preventative maintenance, bearing and spring work. Built rugged and reliable, it will provide years of trouble free service with practically no maintenance. The FSJ-200 combines outstanding features with Gray world class quality.

• Air/Hydraulic operation...no pumping required, air does all the work
• Manual pump feature included...gives you the versatility needed when an air supply is not available.
• 10 ton capacity...enough strength demanded for today's maintenance shops
• Versatile...combines a low starting height of 6-1/2" with a high lift height of 26-5/8"
• Easily portable...large front wheels combined with long life rear swivel casters
• Rugged...high quality welded steel frame construction.

Designed for use on vehicles with a low starting height, the FSJ-120 is the problem solver for a variety of vehicles.

• Low starting height of 4-3/4"...allows a variety of vehicles to be picked up including mid-size to class 8 vehicles.
• Air/Hydraulic operation...no pumping required, air does all the work with as little as 90 psi.
• Manual pump feature included...gives you the versatility needed when an air supply is not available.
• 6 ton capacity...enough strength demanded for today's maintenance shops
• Easily portable...large front wheels combined with long life rear swivel casters
• Rugged...high quality welded steel frame construction

Back to top

The Perfect Mid-Range Floor Service Jack

• Versatile... Combines a long narrow design with four tons of lifting power.
• Air does the work... no pumping required!
• A manual feature incorporates a quick-rise foot pedal for speed when air is unavailable.

Automotive Transmission Jacks

Model HTJ-1000
Hi-Rise Transmission Jack 1/2 Ton (1,000-lb) capacity

The #1 choice of the professional automotive transmission repair shops. The HTJ-1000 has proven to be a leader by contributing years of trouble-free service and unsurpassed quality. The unique two-stage design has been an asset to many technicians allowing them complete control of the jack during installation and removal of transmissions. Used exclusively by some of the largest transmission repair facilities, Gray's model HTJ-1000 will definitely become the most popular transmission jack used in your shop!

• Unique design...Gray's two-stage air and hydraulic design combines the power, speed, precision and durability demanded by the professionals.
• User friendly...first-stage foot pedal controls, ratcheting head brackets and fore/aft tilt provides precise adjustments.
• Powerful...1,000-lb capacity
• Reliable...a time proven hydraulic system insures years of trouble free service.
• Exact control...of transmission with high degree of forward tilt of 50°, rear tilt of 20° and side tilt of 10° adjustments.
• Smooth maneuverability...four high quality 4" diameter swiveling casters.
• Rugged "Nylon Speed Strap" provided...quickly secures the load

• Surface mounted...fits nearly any bay with no excavating
• Two-post design...in asymmetric or symmetric configuration.
• Electric/Hydraulic power...no air needed.
• Choice of capacities...to fit your specific needs.

Model QL-1500
15,000 lb Two Post Symmetric Lift

Model QL-100
10,000 lb Two Post Asymmetric Lift

Back to top

• Skid proof system... incorporates a bonded ply rubber matting that secures ramp to surface.
• Versatile... use on a variety of vehicles with low profile design.
• Portable... easily maneuvers around shop with two wheels.
• Long retractable store away T-handle...allows easy flexibility when moving around shop.

Back to top

• Combines power with a long reach
• Unique Scissors Design...enables flexibility when lifting a variety of vehicles
• 100% Air operated...for speed and years of trouble-free maintenance
• Large pneumatic wheels...makes portability throughout the shop a breeze
• Adjustable arms and saddles...provide versatility when lifting a variety of vehicles
• Various lift points...lift from bumper, frame or axle on the vehicle

• 100% Air operated...provides unsurpassed years of trouble-free service
• 7 ton capacity...enough capacity to lift one end of a 28,000-lb vehicle
• Large pneumatic tires...allow easy portability throughout the shop
• Removable pinnable saddles...makes adjustments and positioning of jack simple

Back to top

11-Tons of Crushing Force at 200 psi!

• 100% Air operated...no electrical connections
• Mounting stand included...no wall mounting or complicated installation required
• No mess...designed to operate clean and efficient
• Removable catch basin...for easy cleaning
• Crush one 16" tall truck filter or four 9" tall automotive spin-on filters
• Interlocking Door...prevents door from being opened while ram is in any other position than fully raised.
• Convenient operation...one hand is required to latch the door.

Remove up to 95% of used oil and crush filters down to 20% of their original size.

Air pressure required for a given crushing force:
12,375-lb .......... 110 psi
13,500-lb .......... 120 psi
14,500-lb .......... 130 psi
15,500-lb .......... 140 psi
16,750-lb .......... 150 psi
18,000-lb .......... 160 psi

With the regulations on disposal of used oil and filters, the use of oil filter crushers has dominated the market. Eliminate the need to have your local used oil service company come in and haul off the filters so often. With an oil filter crusher you can fit at least twice as many filters in a 55-gallon barrel crushed rather than uncrushed. The savings generated from this will justify the purchase of a piece of equipment in no time at all.

Back to top

• Offset column...no more hassling around objects with impact wrench; complete open workspace
• Precise...roller bearing arms combined with rear tilt makes alignment of wheel to vehicle a breeze
• Sturdy...easily supports a set of dual tandem wheels
• Portable...maneuvers around shop smoothly due to three large swivel casters.

Back to top

• Four lockable swivel casters that can be easily converted to fixed straight wheels with a quick simple adjustment
• Hydraulic pump for precise lifting adjustments
• Nylon Speed Strap included to quickly and conveniently secure the load
• Flexible design accommodates both super single and dual wheel assemblies

Model 2100

• Non-slip rim lock system...ensures positive rim locking at point on wheel which minimizes damage.
• Eliminates bead damage...easily handles hard to mount and dismount dual beaded steel radials.
• Versatile...handles an array of various tubeless tires ranging in size from 19.5" to 24.5".
• Simple...Operator controls from one central location.
• Rugged...engineered with Gray's famous heavy-duty welded steel frame construction and low maintenance design.
• More rotational torque than any comparable machine on the market.
• Incorporates a bead loosening system...eliminates the need for rim damaging hammers.
• Accommodates most "super single" tires with optional adapters.
• Designed with a protection system that guards against damage to aluminum rims.

Back to top